RTR-500 Series - Wireless Thermo Recorder

Specifications
FCC model / CE model
RTR-501/501L
RTR-502/502L
RTR-503/503L
Number of Channels 1 Ch (Temperature) 1 Ch (Temperature) 2 Ch (1 Temperature and
1 Humidity channel)
Sensor Internal Temp. Sensor External Temp. Sensor (TR-5106) External Temp. and
Humidity Sensor
(TR-3310)
Unit of Measurement °C, °F °C, °F °C, °F, %
Thermal Time Constant 15 min.
L Type: 25 min.
Approx. 15 sec. (in air)
Approx. 2 sec.
(in agitated water)
-
Sensor Response Time - - About 7 min.
(90% response)
Measurement Range - 40 to 80 °C - 60 to 155 °C 0 to 55 °C
10 to 95%RH
Measurement Accuracy Avg±0.5°C Avg±0.3°C
(-20 to 80°C)
Avg±0.5°C
(-40 to -20°C / 80 to 110°C)
Avg±1.0°C
(-60 to -40°C / 110 to 155°C)
Avg±0.3°C
±5%RH
(at 25°C and 50%RH)
Measurement Display Resolution 0.1°C 0.1°C 0.1°C / 1%RH
Recording Intervals Select from 15 choices:
1,2,5,10,15,20,30 sec. / 1,2,5,10,15,20,30,60 min.
Logging Capacity 16,000 readings 8,000 data sets (One data set consists of readings for all channels in that type of unit.)
Recording Mode Endless : Upon reaching logging capacity, the oldest data is overwritten and recording continues.
One-time: Upon reaching logging capacity, recording will automatically stop.
* When using RTR-500GSM, RTR-500NW or RTR-500AW as a Base Unit, only "Endless" can be selected.
LCD Display Items Current Readings, Recording Settings,
Battery Life Warning, Over Measurement Range Warning,
Amount of Recorded Data, Unit of Measurement
Power Lithium Battery (LS14250 (SAFT)) x 1
for L type: Large Capacity Battery Adaptor Kit(RTR-500B1 / sold separately) (*1) /
External Power Adaptor Kit(RTR-500A1 / sold separately)
Battery Life (*2) About 10 months
L Type: About 4 years
Radio Standard Specifications FCC Part15 Section247 / IC RSS-210 (Frequency Range: 902 to 928MHz)
ETSI EN 300 220 (Frequency Range: 869.7 to 870MHz)
Wireless Transmission Range About 150 meters (500ft) if direct and unobstructed.
Communication Interfaces Short Range Radio Communication
Optical Communication
Communication Time When downloading one Remote Unit at full logging capacity:
Wireless communication : about 2 min.(*3)
Optical communication : about 160 sec.
Water Resistance immersion proof splash proof(*4)
Dimensions H62mm x W 47mm x D19mm(excluding protrusions)
L Type: with Large Capacity Battery Pack D 46.5mm
Antenna length 24mm
Weight About 56g (including 1 lithium battery)
L Type: about 109g (with Large Capacity Battery Pack)
Unit Temp. Resistance -30 to 80°C (Unit temp resistance and measurement range is -40 to 80°C but wireless communication cannot occur in an environment of less than -30°C )
Others In order to download data via wireless communication, it is necessary to purchase Base Unit:
RTR-500, RTR-500GSM, RTR-500NW/500AW or RTR-500DC
(*1) When using RTR-500B1 it is necessary to purchase Lithium Battery (LS26500). For details, contact your local authorized distributor.
(*2) The stated battery life is for when it is used in an environment of 25°C and recorded data is downloaded at a rate of once a day or "Monitoring Current Readings" occurs at a rate of once every 10 minutes. Battery life depends on measurement environment, recording interval and battery performance.
(*3)The same amount of time will be necessary for each added Repeater.
(*4) The stated water resistance rating is for when the sensor is connected to the unit. However, this does not include the sensor areas for the RTR-503/503L models. Not for continued immersion.

FCC model / CE model RTR-505-TC/
505-TCL
RTR-505-Pt/
505-PtL
RTR-505-V/
505-VL
RTR-505-mA/
505-mAL
RTR-505-P/
505-PL
Measurement Items (*1) Temperature Voltage 4-20mA Pulse
Recording Intervals Select from 15 choices: 1, 2, 5, 10, 15, 20, 30 sec. / 1, 2, 5, 10, 15, 20, 30, 60 min.
Logging Capacity 16,000 readings
Recording Modes Endless: Upon reaching logging capacity, the oldest data is overwritten and recording continues.
One Time: Recording automatically stops when logging capacity is full.
* When using RTR-500NW or RTR-500AW as a Base Unit, only "Endless" can be selected.
LCD Displayed Items Measurement, Recording Status, Recording Mode, Battery Life Warning, Unit of Measurement, Full (Logging Capacity FULL), Sensor Unconnected, Input Module Unconnected, Measurement Range Exceeded, Display Range Exceeded)
Power Lithium Battery LS14250 (*2) x 1 / Lithium Battery CR2 x 1
For L type: Large Capacity Battery Adaptor Kit (RTR-500B1 /sold separately)
External Power Adaptor Kit (RTR-500A1 /sold separately)
Battery Life (*3) About 10 months (for temperature measurement)
About 4 years (for temperature measurement with L type)
Radio Standard Specifications FCC Part15 Section247 / IC RSS-210 (Frequency Range: 902 to 928MHz)
ETSI EN 300 220 (Frequency Range: 869.7 to 870MHz)
Wireless Transmission Range About 150 meters (500ft) if direct and unobstructed
Communication Interfaces Wireless Communication / Optical Communication
Communication Time When downloading one Remote Unit at full logging capacity
Wireless Communication: about 2 min.
Optical Communication: about 160 sec.
Waterproof Capacity Splash proof (rated for use in daily life) (*4)
Dimensions H62mm x W 47mm x D19mm (excluding protrusions and sensor)
L type: D 46.5mm (with Large Capacity Battery Pack)
Antenna length: 24mm
Weight About 55g (including battery / excluding Input Module)
L Type: about 109g (with Large Capacity Battery Pack)
Operating Environment - 30 to 80°C (*5)
(The operating temperature range and measurement range is -40 to 80°C but wireless communication cannot occur in an environment of less than -30°C.)
Other In order to download data via wireless communication, it is necessary to purchase Base Unit:
RTR-500, RTR-500NW/500AW or RTR-500DC
(*1) For information about measurement range, see the specifications of each Input Module in the Options Page.
(*2) The included lithium battery (LS14250) is not sold in stores. Please purchase the optional battery set for low-temperature use (TR-11P2) for replacement.
(*3) Battery life varies depending upon the connected Input Module, measuring environment, frequency of communication, Unit settings, and battery performance.
(*4) This is the waterproof capacity of a Unit with an Input Module connected. Note that sensor connector of the Input Module is not water resistant.
(*5) If you are using a Data Logger in an environment where temperatures may be lower than -20°C or higher than 60°C, we strongly suggest purchasing and using the optional battery set for low-temperature use (TR-11P2)

Product RTR-574 RTR-574-H
Temperature/Humidity Sensor (External) THA-3151 HHA-3151(High-Precision Type)
Thermistor Polymer Resistance Platinum Resistance Electrostatic Capacitance
Measurement Channels Temperature 1ch Humidity 1ch Temperature 1ch Humidity 1ch
Units of Measurement °C, °F %RH °C, °F %RH
Measurement Range 0 to 55 °C 10 to 95 %RH -30 to 80 °C 0 to 99 %RH
Accuracy ±0.5 °C ±5 %RH (at 25 °C, 50 %RH) ±0.3°C (at 10 to 40 °C) ±0.5°C (at all other temperatures) ±2.5 %RH(at 25 °C, 10 to 85 %RH) ±4.0 %RH(at 25 °C, 0 to 10 % or 85 to 99 %RH) At temperatures other than 25 °C and ≥ 0 °C, add ±0.1 %RH per degree of difference from 25. Humidity Hysteresis: ±1.5 %RH or lower(*1)
Measurement Resolution 0.1 °C 1 %RH 0.1 °C 0.1 %RH
Response Time (90%) Approx. 7 min. Approx. 7 min. Approx. 20 sec.
 
Illuminance/UV Sensor (External) ISA-3151
Measurement Channels Illuminance: 1ch
UV intensity: 1ch
Units of Measurement Illuminance: lx, Klx
UV intensity: mW/cm2
Measurement Range Illuminance: 0 lx to 130 Klx
UV Intensity: 0 to 30 mW/cm2
Units of Cumulative Measurement Cumulative Illuminance: lxh, Klxh, Mlxh
Cumulative amount of UV Light: mW/cm2, W/cm2
Display Range of Cumulative
Measurement
Illuminance: 0 lxh to 90 Mlxh
UV Intensity: 0 mW to 62 W/cm2h
Accuracy Illuminance: 10 lx to 100 Klx:±5 % (at 25°C, 50 %RH) UV Intensity: 0.1 to 30 mW/cm2:±5 % (at 25°C, 50 %RH) (*2)
Relative Spectral Response Illuminance: Approximated to the CIE standard response function V (λ )
UV Intensity: 260 to 400 nm
Measurement Resolution Illuminance: Minimum of 0.01 lx
UV Intensity: Minimum of 0.001 mW/cm2
Response Time (90%) 3 sec. (at recording interval of 1 sec.)
6 sec. (at other intervals)
 
Logging Capacity 8,000 data sets (One data set consists of readings for all channels in that type of unit.)
Recording Interval Select from 15 choices: 1, 2, 5, 10, 15, 20, 30 sec. or 1, 2, 5, 10, 15, 20, 30, 60 min.
Recording Mode (*3) Endless (Overwrite oldest data when capacity is full) or One Time (Stop recording when capacity is full)
LCD Display Items Measurements, Battery Life Warning, etc.
- Measurements: Illuminance / UV Intensity / Temperature / Humidity / Cumulative Illuminance / Cumulative amount of UV Light
- Display Pattern: Alternating or Fixed display
- Display Digits: Up to 4 digits
Communication Interfaces - Wireless Communication (Short Range Radio Communication)
FCC Part15 Section247 / IC RSS-210 (Frequency Range: 902 to 928MHz, RF Power: 7mW)
ETSI EN 300 220 (Frequency Range: 869.7 to 870MHz, RF Power: 5mW)
- USB Communication
- Serial Communication (RS-232C) (*4)
Wireless Transmission Range Approx. 150 meters (500 ft) if direct and unobstructed
Power AA Alkaline Battery (LR6) x 1
Battery Life (*5) Approx. 4 months
Dimensions H 55 mm x W 78 mm x D 18 mm(excluding protrusions)
Antenna Length: 60 mm
Weight About 68 g (including battery, excluding sensor)
Operating Environment Temperature: -10 to 60 °C Humidity: 90 %RH or less (no condensation)
Accessories AA alkaline battery (LR6), USB Communication Cable (US-15C), Illuminance/UV Sensor (ISA-3151), Temperature/Humidity Sensor (THA-3151 or HHA-3151), Software (CD-ROM), User's Manual Set (Warranty Included)
Compatible Base Units RTR-500C, RTR-500NW/500AW, RTR-500DC
  • *1: When used in environments where temperature and humidity are over the values of 50°C 75%, 60°C 50%, 70°C 35%, and 80°C 25%, sensor hysteresis may fluctuate by values greater than ±1.5%RH. Under certain circumstances, it may take some time to return to normal measurement capability.
  • *2: Compared to the value measured by the T&D standard sensor for calibration under our calibration light source.
  • *3: Only "Endless" is available when using RTR-500W for Windows.
  • *4: If necessary, serial communication can be established by using our communication protocol (contact your local distributor) to write a software program. In such a case, an optional serial communication cable (TR-07C) is needed.
  • *5: Battery life varies depending upon the ambient temperature in which it is used, the recording interval, the frequency of communication, and the battery performance. All estimates are based on operations carried out with a new battery and are in no way a guarantee of actual battery life.
Dimensions
RTR-501 / 501L
RTR-501 / 501L Dimensions
1: Antenna
2: LCD Display
3: Optical communication Area
4: Back Case
5: Large Capacity Battery
RTR-502 / 502L
RTR-502 / 502L Dimensions
1: Antenna
2: LCD Display
3: Optical communication Area
4: Sensor Jack
5: Fluoropolymer-coated Electrical Wire
6: Thermistor
7: Back Case
8: Large Capacity Battery
RTR-503 / 503L
RTR-503 / 503L Dimensions
1: Antenna
2: LCD Display
3: Optical communication Area
4: Sensor Jack
5: Vinyl Chloride Coated Electrical Wire
6: Polypropylene Resin
7: Temperature/Humidity Sensor
8: Back Case
9: Large Capacity Battery
RTR-505 / 505L
RTR-505 / 505L Dimensions
1: Antenna
2: LCD Display
3: Optical communication Area
4: Sensor Jack
5: Back Case
6: Large Capacity Battery
7: Polyamide (black)
8: Vinyl Chloride Coated Electrical Wire
9: M3.5 Crimp Terminal
RTR-574
RTR-574 Dimensions
1: Antenna
2: Sensor Jack
3: POWER Button
4: LCD Display
5: DISPLAY Button
6: INTERVAL Button
7: REC/STOP Button
8: USB Communication Cable Jack
9: Illuminance Sensor Area
10: Ultraviolet Sensor Area
11: Temperature/Humidity Sensor Area