Radio Signal Check Tool (RTR500B) (US)

Application that can be used to measure the signal strength between the Base Units, Remote Units, and Repeaters, as well as monitor radio frequency interference.

Details

Application that can be used to measure the signal strength between the Base Units, Remote Units, and Repeaters, as well as monitor radio frequency interference.
This tool can help you place units to improve radio reception.
Note: "Radio Signal Check Tool (RTR-500)" was renamed to "Radio Signal Check Tool (RTR500B)" to add support for the new model.

Compatible Products Data Collection Devices:
RTR500BW, RTR500BM, RTR500BC,
RTR-500NW/AW, RTR-500MBS-A, RTR-500

Remote Units:
RTR500B Series, RTR-600 Series,
RTR-500 Series, RTR-601 Series
VersionVer. 2.00 (US) (May 17, 2022)
File Nameapp_radiosignal_200-us-eng.exe (US)
File Size60.7 MB (US)
Operating EnvironmentCompatible OS *1
Microsoft Windows 11 64bit English
Microsoft Windows 10 32/64bit English
CopyrightT&D Corporation
ReplicationCopying to another media is expressly forbidden
*1: For installation, it is necessary to have Administrator (Computer Administrator) rights.

Installation Procedure

  1. Double-click the update package to extract it to your hard drive.
  2. Follow instructions in Set up Program.
  3. Program will automatically be installed on the Hard Disk.

Revision History

Ver. 2.00 May 17, 2022

  • Added support for the RTR500BW, RTR500BM, RTR500BC, and RTR-602.
  • The software name has been changed from "Radio Signal Check Tool (RTR-500)" to "Radio Signal Check Tool (RTR500B)".

Ver. 1.05 December 24, 2021

  • Fixed a problem that caused the software to freeze on Windows 10 (build version 2004 or later) and Windows 11.
  • Fixed a problem where there was an empty line in the signal strength results table when multiple wireless groups were registered.
  • Fixed a problem that occurred when checking the signal strength of the RTR-500 on a PC with “RTR500BC for Windows” installed, where the registration information could not be obtained.
  • Changed some messages as shown below (before → after).
    Common messages for Signal Strength Check and Channel Interference Check:
    ・Canceling the signal strength check → Canceling the check
    ・The channel interference check is complete. → The check is complete.

Ver. 1.01 March 13, 2019

  • The signal strength between “Repeater - Repeater” is now output to the result of the check.

Ver. 1.00 October 20, 2017

  • First Release

User Agreement

Disclaimers

  1. Although T&D Corporation has carried out operational tests on Radio Signal Check Tool (RTR500B) (US), hereafter referred to as "the software", we cannot guarantee that all operations will work properly under all conditions.
  2. T&D Corporation shall not accept any responsibility for any damage whether direct or indirect that results from the usage of the software.
  3. Specifications of the software may be subject to change and service may be terminated without advance notice to the user. In such a case T&D Corporation shall not be responsible for any damages whether direct or indirect from the inability to use the software.
  4. T&D Corporation has no obligation to correct any defects found in the software.

Copyright

  1. All copyrights for the software, including all of the programs and all related documents, are the sole property of T&D Corporation.
  2. The software is for use free of charge. Redistribution is permitted as long as it is to others for non-profit. In this case, all terms and conditions as written in the above disclaimers automatically transfer and hold true and valid for the party to which the program was redistributed. Please note that if you wish to commercially redistribute the program please contact your local distributor or T&D representative.
  3. The reprinting or redistribution for commercial purposes whether in part or in whole, in magazines or as a part of any product is strictly forbidden without the expressed consent of T&D Corporation. Any inquiries concerning commercial redistribution should be directed to the Sales Department of T&D Corporation.
  4. Please do not attempt to make any changes or modifications to the software.
AGREE AND DOWNLOAD
Page Top