RTR-500W for Windows
||RTR-500W for Windows
|RTR-500W for Windows is the exclusive software for carrying out settings and managing data for the RTR-500NW/AW. It includes the following four applications: RTR-500W Settings Utility , Temperature/Humidity Graph, Adjustment Tools, and Data Downloading Tools.
RTR-500NW/AW, RTR-500 Series, RTR-601
* RTR-601 is available for US only.
October 22, 2014
|Compatible OS (*1)
Microsoft Windows 10 32/64bit
Microsoft Windows 8 32/64bit
Microsoft Windows 7 32/64bit
Microsoft Windows Vista 32bit (SP1 or later)
|Display Languages (*2)
English, Spanish, Portuguese(Brazil)
* Parts of the software and documentation are in English.
(*1) For installation, it is necessary to have Administrator (Computer Administrator) rights.
(*2) We recommend using an operating system in the same language as the display language. Operation in different language is not guaranteed.
Installing the Software
Please follow these procedures to install RTR-500W for Windows
1. Double-click the update package to extract it to your hard drive.
2. Follow instructions in Set up Program.
3. RTR-500W for Windows will automatically be installed on the Hard Disk.
Summary of Changes
Version 1.45 (EU/US): October 2014
- The Properties display for the "Auto Calibration" function in RTR-576 was changed.
Version 1.44 (US): February 2014
- A problem was fixed in the RTR-500W Settings Utility, where the recording could not be started for RTR-500 Series Remote Units when an RTR-601 has been registered as a Remote Unit.
Version 1.43 (EU/US): December 2013
- A change has been made to enable selection of the conditions for warning transmission.
- A change has been made to enable selection of the conditions for warning with contact output.
* The RTR-500W for Windows version 1.43 needs to be used in combination with the RTR-500NW/AW Firmware version 2.30 or later.
Version 1.42 (EU/US): July 2013
- The "Auto-Sending of Recorded Data" function can now be set using a specific time interval as well as setting specific dates and times.
* The RTR-500W for Windows version 1.42 needs to be used in combination with the RTR-500NW/AW Firmware version 2.10 or later.
Version 1.41 (EU/US): April 2013
- Applications are now started through an application launcher.
Version 1.40 (EU/US): October 2012
- Made compatible with the RTR-507 and RTR-576.
Select your product
All of T&D wireless products meet any one of several different wireless compliant standards.
Please refer to the label on your product and select either of the following:
This software is for FCC type (US) only, and cannot be used with the CE type (EU) products. Before downloading, please check for the CE or FCC marking on the product.