Downloads

T&D Recorder for Windows (TR-5,7xU)
Software Information
Software T&D Recorder for Windows (TR-5,7xU)
About
 this software
This software has been specifically designed for use only with TR-57DCi, TR-57U, TR-50U, TR-50C, TR-5i Series, TR-5S Series, TR-5 Series, TR-7Ui Series and TR-7U Series, allowing you to control all settings, data downloading and graph creation, as well as other functions.
Display
 Languages
English
Compatible
 Products
TR-57DCi, TR-57U, TR-50U, TR-50C, TR-5i Series, TR-5S Series, TR-5 Series, TR-71Ui/72Ui, TR-73U, TR-77Ui, TR-71U/72U
Version 1.91(E)
Release Date April 12, 2011
Operating
 System
  Environment
Compatible
 OS
Microsoft Windows 7 32/64bit English
Microsoft Windows Vista 32bit English
Microsoft Windows XP 32bit (SP2 or above) English
CPU A Stable Windows Operating Environment
Memory A Stable Windows Operating Environment
Hard Disk More than 50 MB of free space (Data will need more space)
Monitor VGA(640x480) more than 256 colors
Other
Copyright T&D Corporation
Restriction Not for any use with other Media.
Note
NOTE
Do not connect a device to your computer until the application has been installed.
Normally during the application installation, the USB driver will also be installed automatically through the program. However, once a device has been connected to the computer, an incorrect USB driver may have been installed. In such a case, even if this application is installed, the device will not be recognized properly.

If the device cannot be detected and recognized properly even after the application has been installed and the device has been connected to the computer, please reinstall the USB driver from the Device Manager Window. (For details about how to reinstall the USB driver, refer to “If Installation Fails” or “Installing the USB Device Driver” in the User’s Manual that comes with your device.)

For details about all operations, see the User's Manual of “T&D Recorder for Windows”.
Installing the Software
Please follow these procedures to install [T&D Recorder for Windows (TR-5,7xU)]

1. Start Windows and logon with administrative privileges.
2. Please double click on the downloaded file.
3. Specify the destination folder for the decompressed file, and continue the installation by following the directions as they appear.
4. The updated version of “T&D Recorder for Windows (TR-5, 7xU)” will be automatically installed to your hard disk.
Summary of changes
Version 1.91(E) : April 2011
- A problem was fixed whereby when the battery level for TR-51S/52S or TR-51i/52i fell below 20%, the battery level indicator would show higher value than actual.

Version 1.90(E) : April 2011
- Revised to make compatible with TR-71Ui/72Ui.

Version 1.81(E) : February 2011
- An error was corrected that occurred when downloading data to a PC from an RTR-57U in which a large amount of recorded data was stored (about 70% full).

Version 1.80(E) : November 2010
- Revised to make compatible with 64-bit Windows 7.
- Revised to make compatible with TR-51i/52i and TR-57DCi.
Discontinuation of Support for Earlier Versions of Windows
With the update of our software to be compatible with Windows 7, we have discontinued support for the following earlier versions of Windows: Windows 98SE / Windows Me.

For customers using any of the above previous versions of Windows, please download and use the following software designed to be compatible with those earlier versions.
User Agreement